Wholesale only · Shenzhen warehouse · Same-day stock check +86 153 2343 9001info@wcimci.com
WCIMCILED Parts
+86 153 2343 9001 Get a wholesale priceQuote
Home/Products/Cabinets & Frames
500×500 · 640×480 · 960×960

Cabinets & Frames

Die-cast aluminium, rental and steel cabinets, plus steel frames and mounting structures for walls, poles and trusses.

9 lines in stock4 sub-categoriesNeutral / branded as marked
Die-cast Aluminium Rental Cabinets Steel Cabinets Frames & Structures

The cabinet is the part that decides whether a wall looks flat. Two cabinets from different die-cast tools will not mate flush, and no amount of adjusting the receiving-card brightness hides a 0.5 mm step at eye level. We quote cabinets and modules as a matched set, cut from the same tool, so the seam is a seam and not a shadow line.

For outdoor and large-format work we also supply the steel behind the screen: wall frames, pole brackets, ground supports and the truss fittings for rental. Drawings are checked against the actual cabinet before anything is cut — a 20 mm error at the frame stage is a week lost on site.

What to check before ordering

  • Ask for the flatness figure in writing. ±0.1 mm between cabinets is a different product from ±0.3 mm, and it is the difference you see at three metres.
  • Rental cabinets need the curve option decided at order, not later. Retro-fitting curved locks costs more than the cabinets.
  • For anything above six metres, the frame drawing should come from a structural engineer in the destination country. We supply the steel; the sign-off is local.
Die-cast Aluminium

Die-cast Aluminium

500×500, 640×480 and 960×960, machined edges, ±0.1 mm flatness.

All die-cast aluminium
Rental Cabinets

Rental Cabinets

Quick-lock, curved-capable, road-case friendly, 500×500 and 500×1000.

All rental cabinets
Steel Cabinets

Steel Cabinets

Welded and powder-coated, for fixed outdoor walls and price signs.

All steel cabinets
Frames & Structures

Frames & Structures

Wall frames, pole mounts, ground supports, truss clamps and hanging bars.

All frames & structures
Straight answers

Cabinets & Frames — the questions that come up

Can I buy cabinets without modules?
Yes, and many integrators do — they have modules already and need a cabinet family that matches. Send the module drawing and we confirm the fit before the tooling run.
Do you ship frames flat-packed?
For sea freight, yes: frames are cut, drilled, powder-coated and packed as numbered sections with an assembly drawing. Air freight goes assembled where the size allows.
What about poles and roof mounts?
Standard pole brackets for 100–300 mm diameter, plus custom base plates to your drawing. Roof mounts are quoted per project with wind-load data from your side.

Need a cabinets line that is not listed?

Send the part number, the matrix or a photo of the label. We confirm stock and price the same working day.

Ask for a quote See all categories