SP-MAG
Magnetic Pillar Set for LED Modules
Magnetic pillars for LED modules in 5, 8 and 10 mm heights, N35 neodymium, nickel-plated.
- Neodymium magnet pillar
- N35
- 5 / 8 / 10 mm
US$6.80–11.50 / bagMOQ 5 bags
Full specification
Magnets · Masks · ICs · Tools
Spare Parts
Magnets, masks, bottom covers, driver ICs, fans, tools and flight cases — the small parts that stop a screen for a week when they are missing.
Nobody puts spare magnets in the project budget, and then a installer drops a module and the wall waits four days for a courier. This section exists so that the small parts can go on the same purchase order as the big ones, at wholesale quantities and without a separate minimum.
We stock the parts that match the module families we sell — mask sets for 320×160 and 500×500 modules, magnets in the three common heights, bottom covers for the standard injection tools. If you bought modules elsewhere, send the model and we will match the mask by the screw pattern.
What to check before ordering
- Match the magnet height to the cabinet, not the module. A 5 mm pillar in a cabinet that expects 8 mm gives you a module that sits proud at one corner.
- Buy masks in the same colour batch as the modules. Black masks from two batches read differently under stage light.
- A module suction puller costs less than one service call. Put one in every rental case.
Magnets & Fasteners
Magnets & Fasteners
Magnetic pillars, steel studs, screws and standoffs.
Masks & Bottom Covers
Masks & Bottom Covers
Plastic mask sets and rear covers for standard module sizes.
SP-MASK
Module Mask Set for 320×160 Modules
Replacement mask set for 320×160 mm LED modules, black anti-glare plastic, set of 10.
- 320 × 160 mm
- ABS, anti-glare
- Matte black
US$9.60–14.80 / setMOQ 2 sets
Full specification
Driver ICs
Driver ICs
Common driver and decoder ICs for repair benches.
SP-IC
Driver IC — MBI5124 / ICN2038 / ICN2153 Assortment
LED driver ICs for repair benches: MBI5124, ICN2038, ICN2153 and common decoders, in tubes of 50.
- MBI5124 / ICN2038 / ICN2153
- Tube of 50, ESD bag
- SOP-16 / QFN
US$12–46 / tubeMOQ 1 tube
Full specification
Cooling & Tools
Cooling & Tools
Cabinet fans, filters, suction tools, module pullers.
SP-FAN
Cabinet Cooling Fan Kit
Cabinet cooling fan kit in 60, 80 and 120 mm sizes, 12V DC, with dust filter, guard and mounting screws.
- 60 / 80 / 120 mm
- 12 V DC
- 25 / 40 / 90 m³/h
US$4.20–9.80 / setMOQ 10 sets
Full specification
SP-PULL
Module Suction Puller Tool
LED module suction puller with a single rubber cup, 8 kg lift, for removing magnetic front-service modules without damaging the mask.
- 8 kg
- 55 mm
- Aluminium + ABS
US$6.40–9.20 / pcMOQ 5 pcs
Full specification
Flight Cases
Flight Cases
Road cases for rental cabinets and processors.
SP-CASE
Flight Case for 500×500 Cabinets (8 Cabinets)
Rental flight case for eight 500×500 cabinets.
- 8 × 500×500 cabinets
- 9 mm ply, aluminium extrusion
- Custom-cut foam
US$186–240 / pcMOQ 2 pcs
Full specification
Straight answers
Spare Parts — the questions that come up
What is the minimum for spare parts?
One bag. Magnets ship in 100s, masks in sets of 10, ICs in tubes of 50. Mixed small orders are fine.
Can you match parts for modules bought elsewhere?
Usually. Send a photo of the module back with a ruler across the screw holes and we will identify the mask family.
Do you keep parts for discontinued modules?
For the families we sell, three years after the module is discontinued. Beyond that we can usually still find them, but the lead time is honest — often four to six weeks.
Need a spares line that is not listed?
Send the part number, the matrix or a photo of the label. We confirm stock and price the same working day.