Ribbon cables, power leads, network and fiber runs, aviation connectors and HUB adapter boards — cut to length, tested, packed by the hundred.
Cable is the cheapest line on the BOM and the most common cause of a dead column. A 16P ribbon that was crimped cold will pass a bench test and fail in a cabinet at 50°C three months later. We buy ribbon from two suppliers, pull-test a sample from every reel, and ship the whole order from one reel where the quantity allows.
Lengths are cut to the cabinet, not to a round number. A 500 mm ribbon folded into a 640×480 cabinet puts tension on the connector; a 350 mm one leaves a loop that catches on the door. Tell us the cabinet and we cut the length that fits.
16P HUB75, HUB320 and HUB12 flat ribbon, 200–1200 mm.
HUB75 16P ribbon cable, copper conductors, 200–1200 mm in 50 mm steps, pull-tested per reel.
Module power leads, cabinet mains leads, EU/US/UK plugs.
LED module power cable, 2×1.5 mm² copper, 300 mm leads, pre-crimped with a 2-pin connector.
Cat5e and Cat6 patch, outdoor gel-filled, RJ45 shielded.
Cat6 outdoor Ethernet cable, gel-filled, UV-resistant jacket, 305 m drum.
LC/SC single-mode and multi-mode, armored outdoor runs.
LC single-mode armoured fiber patch cable, 50–300 m, for sender-to-cabinet links.
2–12 pin waterproof connectors, panel mount and cable end.
4-pin waterproof aviation connector, IP68, panel-mount and cable-end pair, 10A per contact.
HUB75 to HUB320, HUB12 buffers, RJ45 breakout.
HUB75 to HUB320 adapter board for mixing 16P receiving cards with HUB320 modules.
Send the part number, the matrix or a photo of the label. We confirm stock and price the same working day.
No WeChat? Email info@wcimci.com or WhatsApp +86 153 2343 9001.
