Wholesale only · Shenzhen warehouse · Same-day stock check +86 153 2343 9001info@wcimci.com
P0.9 – P10

LED Modules

Indoor, outdoor, rental, COB and GOB modules from P0.9 to P10 — 320×160 and 500×500 formats held in stock.

30 lines in stock7 sub-categoriesNeutral / branded as marked

A module is the only part of a screen a viewer ever actually looks at, so it is the part worth arguing about. Ours are sorted by where they will hang, not by marketing names: indoor fine pitch for rooms where people stand two metres away, standard indoor for retail and lobby walls, outdoor for anything that sees rain, and rental for the panels that get flown twice a week.

Every listing carries the numbers a buyer needs to check compatibility before paying — module size, pixel matrix, LED package, scan mode, drive IC, brightness and the HUB interface. If a spec is missing on a page, ask and we will measure it off a sample rather than guess.

What to check before ordering

  • Module size decides the cabinet, not the other way round. A 320×160 module fits almost every 640×480 or 960×960 cabinet; a 250×250 module locks you into one cabinet family.
  • Scan mode and driver IC have to match across a whole wall. Mixing 1/16 and 1/32 modules on one receiving card gives you a band that flickers on camera.
  • Brightness in a catalogue is a peak number measured on a fresh sample. Ask for the calibrated figure at 6500K if the screen faces a window.
Indoor Fine Pitch

Indoor Fine Pitch

P0.9–P2.5 for control rooms, boardrooms and close-viewing retail. COB and SMD options.

Indoor Standard

Indoor Standard

P2.5–P4 for lobby walls, shop windows and stage backdrops.

Outdoor Modules

Outdoor Modules

P2.5–P10, 6,000–7,000 nits, IP65 front, common-anode and GOB options.

Rental Modules

Rental Modules

500×500 and 500×1000 cabinets' worth of module, built for repeated truss work.

COB Modules

COB Modules

Chip-on-board: no lamp bead to knock off, better fill factor, softer at close range.

GOB Modules

GOB Modules

Glue-on-board outdoor modules that survive hail, cleaning brushes and footballs.

Single & Dual Colour

Single & Dual Colour

P10 red and red/green modules for price signs, pharmacy crosses and factory boards.

Straight answers

LED Modules — the questions that come up

Can I mix module batches on one screen?
Only if they come from the same production run. LED binning drifts between runs, and a wall built from two batches shows a seam under a grey test pattern even when the specs match on paper. We ship modules for one wall from one bin.
Do you sell single modules as samples?
Yes. One to five pieces, at the sample price on the listing, freight at cost. Send one back if it does not fit and we will refund the unit price.
What is the MOQ for a full wall?
There is no wall MOQ — we quote per square metre from one square metre. The price tiers start at 10 m² and drop again at 50 m².

Need a modules line that is not listed?

Send the part number, the matrix or a photo of the label. We confirm stock and price the same working day.