P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P2 Indoor LED Module 320×180 mm
P2 indoor module, 320×180 mm, 160×90 dots, SMD1515, 1/40 scan, 600–800 cd/m², 250,000 dots/m², HUB75E. In stock with 640×480 cabinets.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
A clean 160×90 matrix on the standard 320×180 board, so wall sizing is simple arithmetic: every module is 320 mm wide and 180 mm tall, and a 3.2×1.8 m wall is exactly ten by ten.
P2 is the last pitch where individual pixels are visible at close range, and the first where most clients stop caring. For a hotel lobby or a church it is usually the value point.
- 160×90 matrix — easy modular maths for wall sizing
- SMD1515, 1/40 scan
- Same cabinet family as P1.86 and P2.5
- Front magnetic service, no rear access
Specification
| Pixel pitch | P2 |
|---|---|
| Module size | 320 × 180 mm |
| Resolution | 160 × 90 |
| Pixel density | 250,000 dots/m² |
| LED package | SMD1515 |
| Scan mode | 1/40 |
| Brightness | 600–800 cd/m² |
| Refresh rate | ≥ 1,920 Hz |
| Grey scale | 14–16 bit |
| Contrast ratio | 6,000:1 |
| Drive IC | MBI5124 |
| Power (max / avg) | 520 / 260 W/m² |
| Module power (max) | ≤ 24 W |
| Input voltage | 4.2 / 5 V DC |
| Module weight | 0.52 kg |
| Module thickness | 15 mm |
| HUB interface | HUB75E |
| Viewing angle | H 160° / V 140° |
| Maintenance | Front magnetic service |
| IP rating | IP40 front |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Hotel lobbies
- Churches
- Retail
- Museums
Questions on this line
Can it be front service?
Yes, magnetic modules with a front-removal mask. About 6% more and needs 100 mm clearance behind the wall.
Will a MCTRL300 drive a 10 m² wall?
No — that wall is 1.6 million pixels and an MCTRL300 loads 1.3M. Use an MCTRL660 Pro or a Colorlight i6+.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.