P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E. Wholesale from 10 pcs.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
P1.86 is where fine pitch turns into a commodity. 172×96 on a 320×180 board, 288,906 dots/m², and the SMD1515 lamp is noticeably more robust than the 1010 used at tighter pitches — which matters on a wall that gets cleaned.
Most 3–4 m viewing rooms should buy this rather than P1.25. The pixel structure disappears at that distance and the module costs roughly a third per square metre.
- 172×96 matrix, 288,906 dots/m²
- SMD1515 — better impact resistance than SMD1010
- 1/43 scan, ≥3,840 Hz
- 492 W/m² peak, 246 W/m² average
Specification
| Pixel pitch | P1.86 |
|---|---|
| Module size | 320 × 180 mm |
| Resolution | 172 × 96 |
| Pixel density | 288,906 dots/m² |
| LED package | SMD1515 |
| Scan mode | 1/43 |
| Brightness | 550–800 cd/m² |
| Refresh rate | ≥ 3,840 Hz |
| Grey scale | 16 bit |
| Contrast ratio | 8,000:1 |
| Drive IC | ICN1065 / MBI5153 |
| Power (max / avg) | 492 / 246 W/m² |
| Module power (max) | ≤ 26 W |
| Input voltage | 4.2 / 5 V DC |
| Module weight | 0.55 kg |
| Module thickness | 15 mm |
| HUB interface | HUB75E |
| Viewing angle | H 160° / V 140° |
| Maintenance | Front magnetic service |
| IP rating | IP40 front |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Corporate lobbies
- Conference centres
- Retail
- Command centres
Questions on this line
What is the smallest wall that makes sense?
About 3 m². Below that the cabinet count and control gear dominate the price and the pitch stops mattering.
Common anode or common cathode?
Common anode is standard and cheaper. Common cathode cuts power by roughly 30% and runs cooler, at 8–12% more on the module.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P2
P2 Indoor LED Module 320×180 mm
P2 indoor module, 320×180 mm, 160×90 dots, SMD1515, 1/40 scan, 600–800 cd/m², 250,000 dots/m², HUB75E.
- P2
- 320 × 180 mm
- 160 × 90
US$17–22 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.