P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P10 Outdoor LED Module 320×160 mm
P10 outdoor module 320×160 mm, 32×16, SMD3535, 1/4 scan, 6,000–7,000 cd/m², 10,000 dots/m². The cheapest per-square-metre outdoor module.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
At 32×16 per module P10 is the point where an outdoor screen stops being an image and becomes a sign. That is not a criticism — for a 200 m² rooftop board seen from a motorway it is the correct engineering choice.
It is the cheapest module we sell per square metre and the easiest to service: large lamps, generous solder pads, and a mask you can lift with a suction cup.
- 32×16 matrix, 10,000 dots/m²
- SMD3535 with large pads — easy field repair
- 1/4 scan, very low driver count
- IP65 front, 5-year mask UV warranty
Specification
| Pixel pitch | P10 |
|---|---|
| Module size | 320 × 160 mm |
| Resolution | 32 × 16 |
| Pixel density | 10,000 dots/m² |
| LED package | SMD3535 |
| Scan mode | 1/4 |
| Brightness | 6,000–7,000 cd/m² |
| Refresh rate | ≥ 1,920 Hz |
| Grey scale | 14 bit |
| Contrast ratio | 5,000:1 |
| Drive IC | MBI5124 |
| Power (max / avg) | 880 / 360 W/m² |
| Module power (max) | ≤ 46 W |
| Input voltage | 5 V DC |
| Module weight | 0.46 kg |
| Module thickness | 17 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 140° / V 120° |
| Maintenance | Front magnetic service |
| IP rating | IP65 front / IP54 rear |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Rooftop billboards
- Highway signs
- Stadium perimeter
- Construction hoardings
Questions on this line
Can I use it for a shop sign?
Only if the shop is set back 20 m or more. At street distance the pixels are obvious — use P4 or P5.
Is a P10 DIP module cheaper?
Slightly, and more heat-tolerant, but rework is slower. We stock both; SMD is the better default now.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.