P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P2.5 Outdoor LED Module 320×160 mm
P2.5 outdoor module, 320×160 mm, 128×64, SMD1921, 1/16 scan, 5,500–6,000 cd/m², IP65 front. High-brightness small-pitch outdoor module.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
Small-pitch outdoor is a compromise product and should be sold as one. It gives a shopfront a near-print image, but the lamps run hot behind a sealed mask and the module costs roughly three times an indoor equivalent.
It works where the viewer is close and the budget is there: retail façades, bank branches, hotel entrances. For a highway-facing board, P6.67 or P8 does the same job for less than half.
- 128×64 matrix at 5,500–6,000 cd/m²
- SMD1921, IP65 front seal
- 1/16 scan, 3,840 Hz option
- Common-anode version saves about 25% power
Specification
| Pixel pitch | P2.5 |
|---|---|
| Module size | 320 × 160 mm |
| Resolution | 128 × 64 |
| Pixel density | 160,000 dots/m² |
| LED package | SMD1921 |
| Scan mode | 1/16 |
| Brightness | 5,500–6,000 cd/m² |
| Refresh rate | ≥ 1,920 Hz / 3,840 optional |
| Grey scale | 14–16 bit |
| Contrast ratio | 5,000:1 |
| Drive IC | MBI5153 |
| Power (max / avg) | 900 / 380 W/m² |
| Module power (max) | ≤ 48 W |
| Input voltage | 4.2 / 5 V DC |
| Module weight | 0.50 kg |
| Module thickness | 17 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 140° / V 130° |
| Maintenance | Front magnetic service |
| IP rating | IP65 front / IP54 rear |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Retail façades
- Bank branches
- Hotel entrances
- Street-level advertising
Questions on this line
Will it survive direct sun?
The module will. The cabinet interior is the weak point — use a potted supply, a fan kit and a light-coloured cabinet to keep it under 55 °C.
Why so much more than indoor P2.5?
Lamp package, potting, brightness binning and a sealed mask. The board is similar; the sealing and light output are not.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.