P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P2.5 GOB Outdoor LED Module 320×160 mm
P2.5 GOB outdoor module, 320×160 mm, 128×64, SMD1921 with glue-on-board surface, 5,500–6,000 cd/m², IP65. For screens within reach.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
GOB pours a clear epoxy over the lamp surface. The result is a module you can hit with a football, wash with a hose, and install at ground level without a protective grille.
It costs about 12% more than a standard outdoor module and adds a slight haze at very close range. For a school, a stadium concourse or a street-level shopfront, that is a good trade.
- Glue-on-board surface — impact and water resistant
- 5,500–6,000 cd/m², daylight readable
- No protective grille needed at ground level
- Washable with low-pressure water
Specification
| Pixel pitch | P2.5 |
|---|---|
| Module size | 320 × 160 mm |
| Resolution | 128 × 64 |
| Pixel density | 160,000 dots/m² |
| LED package | SMD1921 + GOB |
| Scan mode | 1/16 |
| Brightness | 5,500–6,000 cd/m² |
| Refresh rate | ≥ 1,920 Hz |
| Grey scale | 14 bit |
| Contrast ratio | 5,000:1 |
| Drive IC | MBI5153 |
| Power (max / avg) | 900 / 380 W/m² |
| Module power (max) | ≤ 50 W |
| Input voltage | 4.2 / 5 V DC |
| Module weight | 0.52 kg |
| Module thickness | 18 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 140° / V 130° |
| Maintenance | Front magnetic service |
| IP rating | IP65 front, GOB sealed |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Schools
- Stadium concourses
- Street-level retail
- Public squares
Questions on this line
Does GOB reduce brightness?
By about 5%, inside the binning tolerance. The bigger effect is a slightly softer edge under 1 m.
Can it be repaired?
The epoxy has to be cut back around the failed lamp and re-potted. We supply a repair kit and do it in-house for returned modules.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.