P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P4 Indoor LED Module 320×160 mm
P4 indoor module, 320×160 mm, 80×40 dots, SMD2020, 1/20 scan, 1,000–1,200 cd/m², 62,500 dots/m². Budget indoor wall module in stock.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
P4 indoor is the workhorse for a wall people walk past rather than stand in front of. At 80×40 per module the pixel count is modest, which means cheap control gear: a 10 m² wall is 625,000 pixels and fits on one Colorlight i5A.
It is also the pitch where installation speed matters more than image quality. Magnetic front service, one ribbon per module, four bolts per cabinet.
- 80×40 matrix, 62,500 dots/m²
- Low control-gear cost per square metre
- SMD2020, 1/20 scan
- Magnetic front service, no rear access
Specification
| Pixel pitch | P4 |
|---|---|
| Module size | 320 × 160 mm |
| Resolution | 80 × 40 |
| Pixel density | 62,500 dots/m² |
| LED package | SMD2020 |
| Scan mode | 1/20 |
| Brightness | 1,000–1,200 cd/m² |
| Refresh rate | ≥ 1,920 Hz |
| Grey scale | 14 bit |
| Contrast ratio | 5,000:1 |
| Drive IC | ICN2038 |
| Power (max / avg) | 680 / 290 W/m² |
| Module power (max) | ≤ 35 W |
| Input voltage | 5 V DC |
| Module weight | 0.45 kg |
| Module thickness | 15 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 160° / V 140° |
| Maintenance | Front magnetic service |
| IP rating | IP40 front |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Shopping malls
- Gyms
- Factory boards
- Indoor signage
Questions on this line
Too coarse for a shop window?
If people look in from the pavement at 2 m, yes — go P2.5. Behind the counter at 5 m, P4 reads fine.
What card for 20 m²?
About 1.25 million pixels, so two Colorlight 5A-75E or a Novastar A8s pair on one gigabit port each.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.