P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P5 Indoor LED Module 320×160 mm
P5 indoor module, 320×160 mm, 64×32 dots, SMD2727, 1/16 scan, 1,200–1,500 cd/m², 40,000 dots/m². Low-cost module for large indoor walls.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
P5 indoor is the cheapest way to fill a large indoor wall: 64×32 per module, 40,000 dots/m², SMD2727 lamps that are easy to rework, and a scan mode that any HUB75 card handles without configuration trouble.
It is not a close-viewing product. At 5 m it reads clean; at 2 m you see the grid. For a warehouse, a gym or a church hall where the audience sits far away, that is the right trade.
- Cheapest per square metre in the indoor range
- SMD2727 — the easiest package to rework on site
- 1/16 scan, works with every HUB75 card
- Stocked in 1,200 and 1,500 cd/m² bins
Specification
| Pixel pitch | P5 |
|---|---|
| Module size | 320 × 160 mm |
| Resolution | 64 × 32 |
| Pixel density | 40,000 dots/m² |
| LED package | SMD2727 |
| Scan mode | 1/16 |
| Brightness | 1,200–1,500 cd/m² |
| Refresh rate | ≥ 1,920 Hz |
| Grey scale | 14 bit |
| Contrast ratio | 4,000:1 |
| Drive IC | ICN2038 |
| Power (max / avg) | 700 / 300 W/m² |
| Module power (max) | ≤ 36 W |
| Input voltage | 5 V DC |
| Module weight | 0.46 kg |
| Module thickness | 17 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 160° / V 140° |
| Maintenance | Front magnetic service |
| IP rating | IP40 front |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Gyms
- Warehouses
- Church halls
- Large indoor signage
Questions on this line
Minimum viewing distance?
Roughly pitch × 1,000 mm, so 5 m for comfortable viewing. Camera work wants 1.5× that.
Can it go outdoors under a canopy?
Only if it never sees rain. The module is IP40; for a covered outdoor wall use the P5 outdoor module.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.