P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P6.67 Outdoor LED Module 320×160 mm
P6.67 outdoor module, 320×160 mm, 48×24, SMD2727, 1/6 scan, 5,500–6,500 cd/m², 22,500 dots/m². For highway and rooftop boards.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
The odd 6.67 pitch comes from the 480 mm module that used to dominate outdoor work; on a 320×160 board it lands at 48×24. The effect is fewer pixels per square metre, which means fewer receiving cards and a lower total cost for boards seen from far away.
This is the pitch for a rooftop sign or a highway pylon, where the nearest viewer is 10 m off and readability, not resolution, is the requirement.
- 48×24 matrix, 22,500 dots/m²
- Low card count per square metre
- SMD2727, 1/6 scan
- IP65 front, sealed cable entries
Specification
| Pixel pitch | P6.67 |
|---|---|
| Module size | 320 × 160 mm |
| Resolution | 48 × 24 |
| Pixel density | 22,500 dots/m² |
| LED package | SMD2727 |
| Scan mode | 1/6 |
| Brightness | 5,500–6,500 cd/m² |
| Refresh rate | ≥ 1,920 Hz |
| Grey scale | 14 bit |
| Contrast ratio | 5,000:1 |
| Drive IC | MBI5124 |
| Power (max / avg) | 820 / 340 W/m² |
| Module power (max) | ≤ 42 W |
| Input voltage | 5 V DC |
| Module weight | 0.46 kg |
| Module thickness | 17 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 140° / V 120° |
| Maintenance | Front magnetic service |
| IP rating | IP65 front / IP54 rear |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Highway boards
- Rooftop signs
- Industrial signage
- Stadiums
Questions on this line
Why 6.67 and not 6?
Historical: it divided evenly into the older 480×320 formats. On a 320×160 board you get exactly 48×24.
Can I use a cheaper card?
Yes. At 1,152 pixels per module a standard 5A-75B is plenty — this is the pitch where budget control gear makes sense.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.