P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P0.9375 COB LED Module 600×337.5 mm
P0.9375 COB module, 600×337.5 mm, 640×360 dots, flip-chip COB, 500–600 cd/m², 1/45 scan. Fine-pitch COB for control rooms.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
COB removes the lamp package entirely: chips bonded to the board and covered with a conformal layer. No bead to knock off, no gap between lamps, and a much softer image at close range — which is why control rooms moved to it.
The trade is repairability. A dead pixel cannot be swapped with a soldering iron; the module is replaced. Budget one spare module per 20 m².
- 640×360 matrix, 1.14 million dots/m²
- No lamp bead — survives contact and cleaning
- Lower surface temperature than SMD at the same brightness
- Module-level replacement, not pixel-level repair
Specification
| Pixel pitch | P0.9375 |
|---|---|
| Module size | 600 × 337.5 mm |
| Resolution | 640 × 360 |
| Pixel density | 1,137,778 dots/m² |
| LED package | Flip-chip COB |
| Scan mode | 1/45 |
| Brightness | 500–600 cd/m² |
| Refresh rate | ≥ 3,840 Hz |
| Grey scale | 16 bit |
| Contrast ratio | 10,000:1 |
| Drive IC | COB driver on board |
| Power (max / avg) | 380 / 130 W/m² |
| Module power (max) | ≤ 78 W |
| Input voltage | 4.2 V DC |
| Module weight | 1.95 kg |
| Module thickness | 12 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 170° / V 170° |
| Maintenance | Module swap, front |
| IP rating | IP40 front |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Control rooms
- Broadcast studios
- Command centres
- Premium boardrooms
Questions on this line
Is COB really more robust?
Against impact and moisture, yes. Against a failed driver IC, no — the repair is a module swap, which is why spares matter more.
Can I clean it with a cloth?
A damp microfibre is fine. That is the main practical advantage in a dusty room.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.