P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P1.56 COB LED Module 320×180 mm
P1.56 COB module, 320×180 mm, 205×115 dots, flip-chip COB, 500–600 cd/m², 1/52 scan. Fine-pitch COB at a mid-range price.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
P1.56 is the value entry to COB. The matrix is 205×115, which is not a round number, and that is fine — wall size comes from the cabinet and the pixel count is what the processor sees.
It earns its place in rooms with light control but a tight budget: a law firm boardroom, a hospital briefing room, a university lecture theatre.
- 205×115 matrix, 600 cd/m², no visible lamp grid
- Same cabinet family as the SMD 320×180 range
- About 30% below P1.25 COB
- Flicker-free at 3,840 Hz for camera rooms
Specification
| Pixel pitch | P1.56 |
|---|---|
| Module size | 320 × 180 mm |
| Resolution | 205 × 115 |
| Pixel density | 409,600 dots/m² |
| LED package | Flip-chip COB |
| Scan mode | 1/52 |
| Brightness | 500–600 cd/m² |
| Refresh rate | ≥ 3,840 Hz |
| Grey scale | 16 bit |
| Contrast ratio | 10,000:1 |
| Drive IC | COB driver on board |
| Power (max / avg) | 420 / 150 W/m² |
| Module power (max) | ≤ 24 W |
| Input voltage | 4.2 V DC |
| Module weight | 0.48 kg |
| Module thickness | 10 mm |
| HUB interface | HUB75E |
| Viewing angle | H 170° / V 170° |
| Maintenance | Module swap, front |
| IP rating | IP40 front |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Lecture theatres
- Hospital briefing rooms
- Legal boardrooms
- Showrooms
Questions on this line
Is the odd matrix a problem?
Only if you calculate a wall from pixel count instead of cabinet count. Send the dimensions and we return the layout.
Special processor needed?
No. It is a HUB75-family module; the 3,840 Hz rate just needs a card that supports it.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.