P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P3 Outdoor LED Module 192×192 mm
P3 outdoor module, 192×192 mm, 64×64, SMD1921, 1/16 scan, 5,500–6,500 cd/m², IP65. Square format for 576×576 outdoor cabinets.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
The square outdoor P3 pairs with 576×576 cabinets, the format most European façade jobs specify because it divides cleanly into the openings of a building.
Brightness is the reason to choose it over indoor P3: 6,000+ cd/m² holds an image at noon, where an indoor module washes out to a grey rectangle by ten in the morning.
- 64×64 square board for 576×576 cabinets
- 5,500–6,500 cd/m², readable in direct sun
- IP65 front with a sealed mask gasket
- GOB surface option for high-touch sites
Specification
| Pixel pitch | P3 |
|---|---|
| Module size | 192 × 192 mm |
| Resolution | 64 × 64 |
| Pixel density | 111,111 dots/m² |
| LED package | SMD1921 |
| Scan mode | 1/16 |
| Brightness | 5,500–6,500 cd/m² |
| Refresh rate | ≥ 1,920 Hz |
| Grey scale | 14–16 bit |
| Contrast ratio | 5,000:1 |
| Drive IC | MBI5153 |
| Power (max / avg) | 900 / 380 W/m² |
| Module power (max) | ≤ 33 W |
| Input voltage | 4.2 / 5 V DC |
| Module weight | 0.42 kg |
| Module thickness | 17 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 140° / V 130° |
| Maintenance | Front magnetic service |
| IP rating | IP65 front / IP54 rear |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Building façades
- Petrol stations
- Transit hubs
- Outdoor retail
Questions on this line
Do I need a cooling fan?
Above 25 m² in a sealed cabinet, yes. The module is rated to 60 °C ambient; the supply is not.
GOB or standard mask?
GOB if the screen is within reach or gets pressure-washed. About 12% more and effectively waterproof.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.