P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P10 Dual Colour (R/G) LED Module 320×160 mm
P10 red/green dual colour module, 320×160 mm, 32×16, DIP, 1/4 scan, 1,200–1,800 cd/m², HUB12. For text signs and rate boards.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
Two colours means yellow is available, which is why dual-colour boards are still the default for bank rates, pharmacy signs and bus station text in a lot of markets.
The module is cheap, the controller is cheap, and the whole sign can be built for a fraction of a full-colour wall. That is the entire proposition.
- Red and green DIP lamps, yellow by mixing
- 32×16 matrix, 1/4 scan, HUB12
- Pairs with low-cost async controllers
- Outdoor IP65 version available
Specification
| Pixel pitch | P10 |
|---|---|
| Module size | 320 × 160 mm |
| Resolution | 32 × 16 |
| Pixel density | 10,000 dots/m² |
| LED package | DIP346 R/G |
| Scan mode | 1/4 |
| Brightness | 1,200–1,800 cd/m² |
| Refresh rate | ≥ 480 Hz |
| Grey scale | 8–12 bit |
| Contrast ratio | 2,000:1 |
| Drive IC | Constant current |
| Power (max / avg) | 400 / 200 W/m² |
| Module power (max) | ≤ 22 W |
| Input voltage | 5 V DC |
| Module weight | 0.50 kg |
| Module thickness | 17 mm |
| HUB interface | HUB12 (16P) |
| Viewing angle | H 120° / V 60° |
| Maintenance | Front magnetic |
| IP rating | IP65 (outdoor version) |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Bank rate boards
- Pharmacy signs
- Bus stations
- Text signage
Questions on this line
Can it show Arabic or Chinese?
Arabic yes with the right controller; Chinese needs a controller with a GB font set, which we supply on request.
Is full colour cheaper now?
For small signs, dual colour is still about 40% cheaper once the controller is counted. Above 5 m² the gap closes.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.