P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P5 Outdoor LED Module 320×160 mm
P5 outdoor module 320×160 mm, 64×32, SMD2727, 1/8 scan, 5,500–6,500 cd/m², 40,000 dots/m², 950 W/m² peak. IP65. The default outdoor module.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
P5 outdoor is the most-produced outdoor module on earth, which is good news for buyers: the tooling is mature, the price is stable, and every accessory from mask to magnet is available off the shelf.
The published figures are consistent across suppliers — 64×32, 40,000 dots/m², 1/8 scan, 43 W per module, 950 W/m² peak and 390 W/m² average. Treat the average as the number that sizes your power supply.
- 64×32 matrix, 40,000 dots/m²
- SMD2727 — widely available, easy to rework
- 1/8 scan keeps card count and cost down
- 950 W/m² peak, 390 W/m² average
Specification
| Pixel pitch | P5 |
|---|---|
| Module size | 320 × 160 mm |
| Resolution | 64 × 32 |
| Pixel density | 40,000 dots/m² |
| LED package | SMD2727 |
| Scan mode | 1/8 |
| Brightness | 5,500–6,500 cd/m² |
| Refresh rate | ≥ 1,920 Hz |
| Grey scale | 14 bit |
| Contrast ratio | 5,000:1 |
| Drive IC | MBI5124 / 双锁存 |
| Power (max / avg) | 950 / 390 W/m² |
| Module power (max) | ≤ 43 W |
| Input voltage | 5 V DC |
| Module weight | 0.46 kg |
| Module thickness | 17 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 140° / V 120° |
| Maintenance | Front magnetic service |
| IP rating | IP65 front / IP54 rear |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Billboards
- Building signs
- Outdoor advertising
- Stadium perimeter
Questions on this line
Same as the P5 indoor module?
No. Different lamps, brightness binning, mask and sealing. The footprint happens to match.
How do I clean it?
Low-pressure water and a soft brush. Never a pressure washer on a standard mask — order GOB if it gets washed regularly.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.