P1.25
P1.25 Indoor LED Module 320×180 mm
P1.25 indoor module, 320×180 mm, 256×144 dots, SMD1010, 1/64 scan, 550–700 cd/m², 640,000 dots/m².
- P1.25
- 320 × 180 mm
- 256 × 144
US$56–72 / pcMOQ 10 pcs
Full specification
Neutral · Modules
P3 Indoor LED Module 192×192 mm
P3 indoor module, 192×192 mm, 64×64 dots, SMD2020, 1/32 scan, 800–1,000 cd/m², 111,111 dots/m². Square format for 576×576 cabinets.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
The square 192×192 format exists so cabinets can be square too. Three by three gives a 576×576 cabinet, five by five gives 960×960 — sizes that stack into rental frames without a leftover strip at the edge.
P3 at 64×64 is also the sweet spot for indoor stage backdrops: close enough to look solid on camera, coarse enough that the processor does not have to be expensive.
- Square board — stacks into 576×576 and 960×960
- 64×64 matrix, 111,111 dots/m²
- SMD2020, 1/32 scan
- 1/16 scan version available for older cabinets
Specification
| Pixel pitch | P3 |
|---|---|
| Module size | 192 × 192 mm |
| Resolution | 64 × 64 |
| Pixel density | 111,111 dots/m² |
| LED package | SMD2020 |
| Scan mode | 1/32 |
| Brightness | 800–1,000 cd/m² |
| Refresh rate | ≥ 1,920 Hz |
| Grey scale | 14–16 bit |
| Contrast ratio | 5,000:1 |
| Drive IC | MBI5124 |
| Power (max / avg) | 650 / 280 W/m² |
| Module power (max) | ≤ 26 W |
| Input voltage | 5 V DC |
| Module weight | 0.36 kg |
| Module thickness | 15 mm |
| HUB interface | HUB75 (16P) |
| Viewing angle | H 160° / V 140° |
| Maintenance | Front magnetic service |
| IP rating | IP40 front |
| Operating temperature | -20 °C to +60 °C |
| Lifespan | 100,000 h |
| Warranty | 3 years |
Where it goes
- Stage backdrops
- Churches
- Conference halls
- Nightclubs
Questions on this line
Why square rather than rectangular?
A square cabinet needs no cutting and no half-module at the edge. Rectangular formats force a compromise at the boundary.
Is there a 1/16 version?
Yes, same board, different driver arrangement, same price. Tell us which receiving card you are pairing it with.
Also in LED Modules
All led modules Related lines
P1.5 (1.538 mm actual)
P1.5 Indoor LED Module 320×180 mm
P1.5 (1.538 mm actual) indoor module, 320×180 mm, 208×116 dots, SMD1212, 1/52 scan, 550–700 cd/m², 418,889 dots/m², HUB75E.
- P1.5
- 320 × 180 mm
- 208 × 116
US$34–44 / pcMOQ 10 pcs
Full specification
P1.86
P1.86 Indoor LED Module 320×180 mm
P1.86 indoor module, 320×180 mm, 172×96 dots, SMD1515, 1/43 scan, 550–800 cd/m², 288,906 dots/m², HUB75E.
- P1.86
- 320 × 180 mm
- 172 × 96
US$23–30 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.