HUB75 to HUB320 adapter board for mixing 16P receiving cards with HUB320 modules. Compact, keyed, 5V powered.
HUB320 modules use a single 320-pin connector instead of four 16P ribbons. When the cards are HUB75 and the modules are HUB320, this board bridges them without changing either.
It is a passive adapter with buffering on the clock line, which matters on runs over 300 mm — an unbuffered adapter gives you a column that flickers at the far end.
| Input | 2 × HUB75 16P |
|---|---|
| Output | 1 × HUB320 |
| Buffering | Clock and latch buffered |
| Power | 5 V DC, 0.3 W |
| Dimensions | 68 × 42 mm |
| Warranty | 1 year |
HUB75 16P ribbon cable, copper conductors, 200–1200 mm in 50 mm steps, pull-tested per reel.
LED module power cable, 2×1.5 mm² copper, 300 mm leads, pre-crimped with a 2-pin connector.
Cat6 outdoor Ethernet cable, gel-filled, UV-resistant jacket, 305 m drum.
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.
No WeChat? Email info@wcimci.com or WhatsApp +86 153 2343 9001.
