Wholesale only · Shenzhen warehouse · Same-day stock check +86 153 2343 9001info@wcimci.com
WCIMCILED Parts
+86 153 2343 9001 Get a wholesale priceQuote
Home/Products/Cabinets & Frames/COB Cabinets/Ultra-Slim COB Cabinet 600×337.5×18.9 mm
Neutral · COB-US-600×337.5

Ultra-Slim COB Cabinet 600×337.5×18.9 mm

18.9 mm deep COB cabinet, 600×337.5 mm, 3.6 kg. P0.93 and P1.25, 600 nits, 3,840 Hz, 10,000:1, IP54 front cleanable with water. Wall-flush mounting.

Neutral — no brand on the partQuoted on request unit priceMOQ 2 cabinets14–20 working days
Ultra-Slim COB Cabinet 600×337.5×18.9 mm — front view
Neutral supply

Neutral carton with foam corners. Ships assembled and tested.

18.9 mm from the front glass to the back of the frame, and 3.6 kg for the whole cabinet. That is roughly half the depth and half the weight of a standard 600×337.5 body, which changes what you can hang the wall on rather than just how it looks.

The build is 2×4 light boards, a HUB board, a power supply, the die-cast frame and a separate rear cover. Because the supply is inside a shallower body it runs at under 250 W/m² peak and under 90 W/m² average, which is the reason the thermal design holds up at this thickness. The rear cover is separable and can be customised, so an integrator can put their own mark on it.

  • 18.9 mm deep, 3.6 kg — hangs on drywall with the right anchors
  • IP54 front face, cleanable with water and a cloth
  • 4H surface hardness, matte finish
  • Under 250 W/m² peak, under 90 W/m² average
  • Separate rear cover, customisable
  • Colour temperature adjustable 5,000–10,000 K

Specification

Cabinet size600 × 337.5 × 18.9 mm
Cabinet weight3.6 kg
Pitches availableP0.93 / P1.25
Module size150 × 168.75 mm
Cabinet resolution640×360 (P0.93) / 480×270 (P1.25)
Pixel density1,137,777 / 640,000 dots/m²
CircuitCommon cathode or common anode
Pixel structure1R1G1B, flip-chip
Surface finishMatte, anti-glare
Surface hardness4H
Brightness600 nits, 0–100% software adjustable
Colour temperature8,500 K, adjustable 5,000–10,000 K
Refresh rate3,840 Hz
Frame rate60 Hz
Contrast ratio10,000:1
Viewing angle160° H / V
Power, peak< 250 W/m²
Power, average< 90 W/m²
Input voltageAC 100–240 V, 50/60 Hz
Drive modeConstant current
CalibrationPixel-level brightness and colour, data backup supported
Front IP ratingIP54, cleanable with water
Operating temperature-10 °C to +40 °C, 10–85% RH
Storage temperature-20 °C to +60 °C, 10–60% RH
Rear coverSeparate, customisable
Warranty3 years

Where it goes

  • Retail interiors
  • Hotel lobbies
  • Boardrooms
  • Residential media walls

Questions on this line

Can I hang this on plasterboard?
One cabinet at 3.6 kg, with proper anchors, yes. A wall of them needs a rail or a plywood backer — the load is small but it is a cantilever, and the rail is what keeps the joints flat rather than the anchors.
Why only P0.93 and P1.25?
The shallower body has less room for the driver and the ribbon routing, so it is built around the 150 mm board at the two finest pitches. For P1.56 and above use the A-series body.
Does 18.9 mm mean it runs hotter?
It runs at a lower power density to compensate — under 250 W/m² peak against roughly 325 W/m² on the A-series. In a closed cabinet with no rear ventilation, keep an air gap behind it anyway.
Also in Cabinets & Frames

Related lines

All cabinets & frames

Buying this line in volume?

Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.

Get a tiered quote Read the wholesale terms