P0.9375
P0.9375 COB LED Module 600×337.5 mm
P0.9375 COB module, 600×337.5 mm, 640×360 dots, flip-chip COB, 500–600 cd/m², 1/45 scan.
- P0.9375
- 600 × 337.5 mm
- 640 × 360
US$210–265 / pcMOQ 10 pcs
Full specification
Neutral · COB-P1.25-320×160
P1.25 COB LED Module 320×160 mm
P1.25 flip-chip COB module, 320×160 mm, 256×128 dots, 600 nits, 1/64 scan, 14-bit grey, HUB320 with on-board calibration storage. Drops into SMD cabinet steel.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
The 320×160 board is the format the Chinese channel settled on for fine-pitch COB, and it is the one worth standardising on if you are kitting a fleet of cabinets. Same M4 hole pattern as the SMD equivalent, same HUB320 ribbon, same 14.3 mm thickness — a COB wall drops into steel that was drawn for SMD, which is the whole point of this size.
What you are paying for over SMD at the same pitch is the surface. There is no lens, no metal reflector cup and no exposed wire bond, so the board is flat to the eye, survives a wipe with a damp cloth, and does not throw the little specular highlights that make an SMD wall look like a grid of dots from an angle.
- Drops into standard 320×160 SMD cabinet steel — no new tooling
- Flip-chip die, no wire bond to break under vibration
- 600 nits calibrated, deliberately a room-light product
- HUB320 stores calibration on the board, not in the cabinet
- Matte surface, IP54 front, cleanable with water
Specification
| Pixel pitch | P1.25 mm |
|---|---|
| Module size | 320 × 160 mm |
| Module thickness | 14.3 mm |
| Resolution | 256 × 128 dots |
| Pixel density | 640,000 dots/m² |
| LED type | Flip-chip COB, 1R1G1B |
| Scan mode | 1/64 |
| Module current | ≈ 4.0 A |
| Module power | ≈ 19 W at DC 4.5 V |
| Supply voltage | ≥ DC 4.5 V (recommended) |
| Brightness | 600 nits, calibrated |
| Colour temperature | 9,300 K |
| Contrast ratio | ≥ 10,000:1 |
| Viewing angle | 160° H / V |
| Brightness uniformity | ≥ 95% |
| Colour uniformity | within ±0.003 Cx, Cy |
| Grey scale | 14 bit |
| Refresh rate | 3,840 Hz |
| Frame rate | 60 Hz |
| Drive mode | Constant current |
| HUB interface | HUB320, enhanced |
| Calibration storage | On-board Flash, per module |
| Pixel-level correction | Brightness and colour, supported |
| Module weight | ≈ 0.5 kg |
| Surface hardness | 4H |
| Front IP rating | IP54, damp-cloth cleanable |
| Warranty | 3 years |
Where it goes
- Boardrooms
- Control rooms
- Museums and galleries
- Premium retail
Questions on this line
Will these fit a cabinet I already have?
If the cabinet takes a 320×160 module on a standard hole pattern and feeds it through HUB320, yes. Send the cabinet drawing or the old module part number and we confirm the hole pitch and ribbon orientation before you order.
Can I mix COB and SMD in one wall?
Mechanically yes, visually no. COB and SMD have different black levels and different off-axis behaviour, so a mixed wall shows the seam. Keep one screen to one type.
Which receiver card do these run on?
NovaStar MRV433 or NV3210 — 512×512 at 60 Hz per card, enhanced 320 interface, colour management and fast bright/dark line adjustment. Other brands are being added; confirm the controller before you fix the cabinet count.
Also in LED Modules
All led modules Related lines
P1.875
P1.875 COB LED Module 240×120 mm
P1.875 COB module, 240×120 mm, 128×64 dots, 500–600 cd/m², 1/32 scan.
- P1.875
- 240 × 120 mm
- 128 × 64
US$28–36 / pcMOQ 10 pcs
Full specification
COB-P1.53-320×160
P1.53 COB LED Module 320×160 mm
P1.53 flip-chip COB module, 320×160 mm, 208×104 dots, 600 nits, 1/52 scan, 422,753 dots/m².
- P1.53 mm
- 320 × 160 mm
- 14.3 mm
US$44–60 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.