P0.9375
P0.9375 COB LED Module 600×337.5 mm
P0.9375 COB module, 600×337.5 mm, 640×360 dots, flip-chip COB, 500–600 cd/m², 1/45 scan.
- P0.9375
- 600 × 337.5 mm
- 640 × 360
US$210–265 / pcMOQ 10 pcs
Full specification
Neutral · COB-P1.53-320×160
P1.53 COB LED Module 320×160 mm
P1.53 flip-chip COB module, 320×160 mm, 208×104 dots, 600 nits, 1/52 scan, 422,753 dots/m². The value point between P1.25 and P1.86 for rooms 4–6 m deep.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
Half the fine-pitch enquiries we get land between 1.2 and 1.8 mm, usually a boardroom four to six metres deep where the back row is not going to see pixel structure anyway. P1.53 sits in that gap: 208×104 dots on the same 320×160 board, the same 600 nits, but roughly a third cheaper per square metre than P1.25.
The scan is 1/52 rather than 1/64, which is the reason for the price and also the reason the module current drops to about 2.4 A. Lower current means less heat in the board and a power supply that can be sized smaller — on a 20 m² wall that is real money at the PSU and the air-conditioning line.
- Same 320×160 footprint as P1.25 — interchangeable in one cabinet design
- About 30% cheaper per m² than P1.25 at the same brightness
- 1/52 scan, 2.4 A per module — smaller PSU, less heat
- 422,753 dots/m², clean from 3.5 m
- Matte finish, IP54 front
Specification
| Pixel pitch | P1.53 mm |
|---|---|
| Module size | 320 × 160 mm |
| Module thickness | 14.3 mm |
| Resolution | 208 × 104 dots |
| Pixel density | 422,753 dots/m² |
| LED type | Flip-chip COB, 1R1G1B |
| Scan mode | 1/52 |
| Module current | ≈ 2.4 A |
| Module power | ≈ 11 W at DC 4.5 V |
| Supply voltage | ≥ DC 4.5 V (recommended) |
| Brightness | 600 nits, calibrated |
| Colour temperature | 9,300 K |
| Contrast ratio | ≥ 10,000:1 |
| Viewing angle | 160° H / V |
| Brightness uniformity | ≥ 95% |
| Colour uniformity | within ±0.003 Cx, Cy |
| Grey scale | 14 bit |
| Refresh rate | 3,840 Hz |
| Frame rate | 60 Hz |
| Drive mode | Constant current |
| HUB interface | HUB320, enhanced |
| Calibration storage | On-board Flash, per module |
| Module weight | ≈ 0.5 kg |
| Surface hardness | 4H |
| Front IP rating | IP54, damp-cloth cleanable |
| Warranty | 3 years |
Where it goes
- Boardrooms
- Training rooms
- Retail flagship
- Hotel conference floors
Questions on this line
P1.25 or P1.53 for a 5 m room?
At five metres the eye resolves about 1.5 mm, so P1.53 is already at the limit of what anyone sees. P1.25 buys you margin for a closer front row or a camera zooming in, not sharper text at the back.
Same cabinet as P1.25?
Yes. Same board size, same hole pattern, same HUB320. You can build one cabinet design and offer both pitches on it.
Any difference in the power supply?
A meaningful one. 11 W versus 19 W per module, so a cabinet of 24 modules pulls about 264 W instead of 456 W. Size the PSU from the figure for the pitch you are actually shipping.
Also in LED Modules
All led modules Related lines
P1.875
P1.875 COB LED Module 240×120 mm
P1.875 COB module, 240×120 mm, 128×64 dots, 500–600 cd/m², 1/32 scan.
- P1.875
- 240 × 120 mm
- 128 × 64
US$28–36 / pcMOQ 10 pcs
Full specification
COB-P1.25-320×160
P1.25 COB LED Module 320×160 mm
P1.25 flip-chip COB module, 320×160 mm, 256×128 dots, 600 nits, 1/64 scan, 14-bit grey, HUB320 with on-board calibration storage.
- P1.25 mm
- 320 × 160 mm
- 14.3 mm
US$58–76 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.