P0.9375
P0.9375 COB LED Module 600×337.5 mm
P0.9375 COB module, 600×337.5 mm, 640×360 dots, flip-chip COB, 500–600 cd/m², 1/45 scan.
- P0.9375
- 600 × 337.5 mm
- 640 × 360
US$210–265 / pcMOQ 10 pcs
Full specification
Neutral · COB-P1.86-320×160
P1.86 COB LED Module 320×160 mm
P1.86 flip-chip COB module, 320×160 mm, 172×86 dots, 288,906 dots/m², 600 nits, 1/43 scan. The volume pitch for 3 m+ viewing and fleet builds.
Neutral supply
Neutral packing — blank mask, blank carton. OEM marking and retail box available from 200 pcs.
P1.86 is where COB stops being a premium and starts being the sensible default. At three metres the pixel structure is gone, 600 nits is comfortable under ordinary office lighting, and the module cost has come close enough to SMD that the argument is no longer price — it is whether you want a surface that can be wiped and does not glare.
It is also the pitch that suits volume builds and spares stock. One board covers a lecture theatre, a factory floor information wall and a hotel ballroom, so an integrator can hold one SKU instead of three. 1/43 scan keeps the per-module current at 2.4 A and the power at about 11 W.
- Closest COB pitch to SMD pricing
- 288,906 dots/m² — clean at 3 m and beyond
- 2.4 A / 11 W per module, cool running
- One SKU covers lecture, lobby and ballroom work
- Wipeable matte surface, IP54 front
Specification
| Pixel pitch | P1.86 mm |
|---|---|
| Module size | 320 × 160 mm |
| Module thickness | 14.3 mm |
| Resolution | 172 × 86 dots |
| Pixel density | 288,906 dots/m² |
| LED type | Flip-chip COB, 1R1G1B |
| Scan mode | 1/43 |
| Module current | ≈ 2.4 A |
| Module power | ≈ 11 W at DC 4.5 V |
| Supply voltage | ≥ DC 4.5 V (recommended) |
| Brightness | 600 nits, calibrated |
| Colour temperature | 9,300 K |
| Contrast ratio | ≥ 10,000:1 |
| Viewing angle | 160° H / V |
| Brightness uniformity | ≥ 95% |
| Colour uniformity | within ±0.003 Cx, Cy |
| Grey scale | 14 bit |
| Refresh rate | 3,840 Hz |
| Frame rate | 60 Hz |
| Drive mode | Constant current |
| HUB interface | HUB320, enhanced |
| Calibration storage | On-board Flash, per module |
| Module weight | ≈ 0.5 kg |
| Surface hardness | 4H |
| Front IP rating | IP54, damp-cloth cleanable |
| Warranty | 3 years |
Where it goes
- Lecture theatres
- Lobbies and atria
- Hotel ballrooms
- Industrial information walls
Questions on this line
Is P1.86 too coarse for a meeting room?
Behind a 4 m table, no. Front row at 2 m, you will see the grid on white text. If the room has a head-of-table seat closer than 2.5 m, take P1.53 instead.
Can I use these outdoors?
No. IP54 covers dust and splash on the front face only. COB is an indoor product; for a facade you want an outdoor cabinet with a sealed module and a much higher nit figure.
Do these come with calibration data?
Every module stores its own calibration in on-board Flash, written at the factory. You still run a wall-level calibration after assembly, but the starting point is even rather than random.
Also in LED Modules
All led modules Related lines
P1.875
P1.875 COB LED Module 240×120 mm
P1.875 COB module, 240×120 mm, 128×64 dots, 500–600 cd/m², 1/32 scan.
- P1.875
- 240 × 120 mm
- 128 × 64
US$28–36 / pcMOQ 10 pcs
Full specification
COB-P1.25-320×160
P1.25 COB LED Module 320×160 mm
P1.25 flip-chip COB module, 320×160 mm, 256×128 dots, 600 nits, 1/64 scan, 14-bit grey, HUB320 with on-board calibration storage.
- P1.25 mm
- 320 × 160 mm
- 14.3 mm
US$58–76 / pcMOQ 10 pcs
Full specification
Buying this line in volume?
Send the quantity and the destination port. Tiers start at 100 pcs and drop again at 1,000; DDP pricing needs the postcode.